ENFORCER Voice Dialer Keypad E-921CPQ

Features :

Trigger-activated alarm and dialer with user-programmable 20-second alarm message
16-Digit large display with date/time and function icons
3 Triggers (1 N.C., 2 NO/NC) for multiple zone security
Call in at any time to listen in to room, broadcast to room, arm, and disarm dialer
Listen in, broadcast messages to room, and/or disarm during dialer call out
Programmable PIN number and entry delay timing
5 Programmable emergency telephone numbers (up to 32 digits each)
Programmable auto-dialing cycle repeat times
Home mode function (acts as a door chime when user is at home)
Panic button
Back-lit keypad
Built-in flash memory to protect against system data loss in case of power failure
Touch-Tone dialing
Low-battery indicator for backup battery (battery not included)
DC power input jack (power adapter not included)
9V battery backup (battery not included)
Wall-mountable
Built-in 105dB alarm (with programmable alarm on/off)
Built-in auxiliary output for external alarm or siren
Built-in line seizure

Description

SPECIFICATIONS :
Operating Voltage		9 ~ 12 VDC
Current Draw Max. (at 12VDC)	Standby	5mA
	Dialing	20mA
	Alarm On	150mA
	Relay On	50mA
	Speaker On	250mA
	Total	480mA
Phone System		For Single-line Analog Systems Only
Emergency Voice Message Length (user Recorded)		Up to 20s
Programmable Emergency Phone Numbers		5
Maximum Digits per Telephone Number		32
Backup Battery Type/Life (Not Included)		9VDC/≈20h
Alarm Sound Level at 12” (30cm)		≥105dB
Trigger Inputs	Triggers 1 and 2	NO/NC Trigger (auto Detected)
	Trigger 3	N.C. Trigger
Trigger Input Timer		≥500ms
Auxiliary Output Current (max)		125mA
Operating Temperature		32°~104°F (0°~40°C)
Storage Temperature		4°~140°F (-20°~60°C)
Weight		11.15-oz (316g)
Dimensions		611/16″x411/16″x11/2″ (170x119x38 mm)